The GEKKO Fire Alarm Control Panel is the successor to GFE’s well-known JUNIOR V4 panel.
The GEKKO can have from 1 to 4 addressable loops. It is housed in a functional ABS plastic enclosure, with only two screws used to close and secure the lid.
The new graphic backlit LCD display can accommodate any type of custom characters or graphic symbols, allowing multi-language support, as well as visual and customisable elements.
It can communicate with our proprietary ODYSSEY Graphics Interface, as well as with third party Building Management Systems through a Modbus output. It is also capable of communicating with a repeater unit, using any of the networking interfaces of the CHAMELEON protocol.
Inside the cabinet there is space to install up to 7 AH 24V DC Sealed Lead Acid backup batteries, providing battery supply to the GEKKO and ZEOS associated devices, which boast extremely low energy consumption.
The Cause and Effect programming, as well as all customer specific configuration, is introduced in the GEKKO using the CHAMELEON CONNECTOR software, which is then downloaded to the flash memory of the unit.
MAINS POWER SUPPLY RATING:
90V AC to 230V AC
PRIMARY DC SUPPLY:
28.5V DC @ 2.4 A (Max)
SECONDARY SUPPLY:
21.6 Min. – 27.2V DC (Max) – Battery charger: 27.5V DC
BATTERY CAPACITY (INTERNAL):
Standard box: 2x 12V 7AH; Deep Box: for larger volume batteries
QUIESCENT CURRENT (NO DEVICES):
60 mA
AUX POWER OUTPUT:
2 x 24V DC 300mA / 1 x 24V switched out
MAXIMUM LOOP OUTPUT CURRENT:
1 – 4 loops 900mA alarm peak/165mA quiescent per loop
LOOP TOPOLOGY:
Class A (loop) or Class B (radial)
LOOP CABLE:
Fire resistant 2 x 1.5mm (Max. 1200m) or 2 x 2.5mm (Max. 2000m)
CONVENTIONAL SOUNDER CIRCUITS:
500mA for conventional sounder circuits a+b
AUX. RELAYS FIRE:
2 x rated 2A @ 30V DC resistive / 0.5A @ 120V AC resistive / 0.25A @ 240V AC resistive
AUX. RELAY FAULT:
1 rated 2A @ 30V DC resistive / 0.5A @ 120V AC resistive / 0.25A @ 240V AC resistive
GRAPHICAL LCD DISPLAY:
High definition, high contrast blue backlit 240 x 64 pixels
COMMUNICATION CHANNELS:
2 x configurable communications ports
BMS OUTPUT:
ODYSSEY (Graphical software), TCP IP-WEB (remote web monitoring), MODBUS RTU, ESPA 4.4.4
SOFTWARE CONNECTION:
USB type B
OPERATING / STORAGE TEMPERATURE:
-10ºC to 50ºC
HUMIDITY:
Max. 85% RH Non-Condensing
INGRESS PROTECTION / MATERIAL:
IP30 / ABS
DIMENSIONS:
Standard box: 273 (L) x 403 (H) x 106 (W) mm / Deep box: 273 (L) x 403 (H) x 142 (W) mm
WEIGHT:
1.6 Kg (no batteries)
ENCLOSURE COLOURS:
White (RAL 9003), Red (RAL 3001) or Anthracite (RAL 7016)
