کنترل پنل اعلام حریق AQUAMASTER
The AQUAMASTER Conventional Water Leakage Detection Panel range offers a creatively designed and visually pleasing solution for smaller cost-conscious projects demanding simplicity of operation. Versions available include 2, 4 and 8 zone panels and two styles of repeater. It monitors up to 8 Signaline WDM-KM Control Modules each of which controls up to 1000m of Signaline WD Water Detection Cable.
The outstanding programmable features included in this panel range contradict the facilities commonly available in this type of panel and include: programmable time delay by zone, Day/Night mode, selectable non-latching zones and coincidence detection.
Operation is extremely intuitive, offering simple control and one-button disablement facilities, as well as the one man test mode which provides simple and efficient testing of the system.
Advanced configuration solutions include the following: a dedicated RS232 communication interface allowing connection of up to 4 remote repeater panels, addressable loop interface modules and multiplexed zonal output relays; giving one of the most highly advanced levels of system integration and compatibility existing on the market at
this level.
| PRIMARY SUPPLY VOLTAGE- IN | 230 +10% -15% V AC |
| PRIMARY SUPPLY VOLTAGE- OUT | 28.5V DC nominal |
| PRIMARY SUPPLY CURRENT-OUT | 1.7A @ 28.5V DC nominal (max.) |
| SECONDARY SUPPLY VOLTAGE | 21.0 min. – 27.2 max. V DC – BAT charger o/p 28 V DC |
| SECONDARY SUPPLY CURRENT OUTPUT | 1.1 Amp Maximum @ 200C |
| INTERNAL BATTERY CAPACITY – MAXIMUM | 2 x 12V x 7Ah Sealed VRLA Lead Acid Batteries |
| MAINS FUSE | 4 A -250 V Slow Blow – 20 mm |
| BATTERY FUSE | 1.6 Amp – Resettable |
| DETECTION CIRCUIT SPECIFICATION | |
| NUMBER OF CIRCUITS | 2,4 or 8 |
| ZONE CURRENT – QUIESCENT / ALARM | 4 mA / 60 mA – Maximum |
| MAX. CABLE RESISTANCE / CAPACITANCE | 40 Ohms / 0.470 uF |
| END OF LINE MONITORING | Active EOL – Capacitor |
| Bs5839 DETECTOR REMOVAL COMPLIANT | YES provided diodes are fitted to detector base |
| DEVICES PER ZONE | 1 WDM-KM Control Module – controls up to 1000 m of Signaline WD Water Detection Cable |
| ALARM RESISTANCE VALUE | 270 – 1000 Ohms |
| SOUNDER CIRCUIT SPECIFICATION | 2 – 500mA max. current drive per circuit – fully monitored |
| ALARM VOLTAGE / END OF LINE RESISTOR | 27.5 V DC Nominal / 10 K Ohms – 1/4 Watt |
| AUXILIARY OUTPUTS SPECIFICATION | |
| AUXILIARY RELAY OUTPUT | 1 Fire (COM-NC-NO) – 1 Fault (COM-NC) non-supervised |
| RELAY CONTACT RATING | 50 V DC – 1 Amp resistive loads |
| REMOTE INPUT SPECIFICATION | |
| EVACUATION (CC) – DAY/ NIGHT MODE | Non-Latching – Voltage free contact |
| RESET | Non-Latching – Voltage free contact |
| MECHANICAL & OPERATING SPEC. | |
| MAX. HUMIDITY | 95% RH Non-Condensing |
| OPERATING TEMPERATURE | -10ºC to 50ºC |
| WEIGHT | 1.7 Kg – 7 Kg (inc. 2 x 7 AH 12 V bat.) |
| DIMENSIONS | 272 (W) x 404 (H) x 107 (D) mm |
| COLOUR | White or Red |
